| Chucks • Live Center
• Lathe • Polish |
PSI Mini Grip 3,
4 - Jaw Chuck System
Code:CMG3C
Price: $89.95
Insiders
Club Discount Does Not Apply to this Item
Mini-Grip 3 as the ultimate mini–lathe chuck. This 4 jaw self-centering
system provides everything you need in a mini–lathe chuck system.
It includes:
- Adapters for 1" x 8tpi and 3/4" x 16tpi
- Basic straight jaws for gripping round or square pieces up
to 1-1/8".
- #2 round jaws that grips round stock externally from 1-1/2"
to 2-1/4", and internally bored holes from 2" to 3".
- #1 stepped jaws for gripping smaller dowels from 3/8"to
1-3/8" dia. bored holes from and 1" to 2-3/8" internally.
- 2 each open/close levers
Chuck with all 3 sets of jaws
Standard Flat Jaws
CJAWFJ1 $24.95
Insiders
Club Discount Does Not Apply to this Item |
Utility Grip 4 Jaw Lathe Chuck
(includes 2 chucks)
Code:CUG3418C
Price: $79.95
NOTE: Temporarily Out Of Stock
Insiders
Club Discount Does Not Apply to this Item
New Utility Grip™ 4-Jaw Lathe Chuck— includes 2 sets of
Jaws
Our newest utility chuck is ideal for mini, midi, or even full size
lathes. Hold bowl blanks or spindles from the inside or outside with
the included #1 and #2 jaws. A screw chuck (not shown) is also included
as an added bonus.
- #2 jaws expands from 3" to 3-3/4" dia. to grab inside.
Grips from 1-5/8" to 3-1/2" dia. from the outside.
- #1 jaws expand from 11/16" to 2-3/4" to grab inside
(2 steps). Grips from 3/32" to 1-3/8" from the outside
Includes adapters for 3/4" x 16tpi and 1" x 8tpi (not shown).
Weight is 5lbs.
Set of Jumbo Flat
Jaws
CJAWFJ2 $24.95
Insiders
Club Discount Does Not Apply to this Item |
Barracuda Chuck System
Code:CSC2000C
Price: $124.95
Insiders
Club Discount Does Not Apply to this Item
Barracuda 2000C System:
Chuck System includes 4 sets of jaws
The sleek and powerful PSI Barracuda 2000C lathechuck provides world
class design and performance. You will be impressed by the chuck's
rich chrome plating, and its very smooth action. With its wide variety
ofaccessories, the chuck will mount any project you need onto your
lathe. Ideal for bowls, spindles small projects, and much more. System
includes: screw chuck adapter,#1 jaws,#2 jaws,#3 jaws,and 1"
pin jaws. |
Woodturner's 3 Jaw Micro Chuck -
3/4" x 16 tpi
Code:LCM34
Price: $49.95
For 3/4" x 16tpi headstocks
Insiders
Club Discount Does Not Apply to this Item
Woodturner's 3 Jaw Micro Chuck - 1"
X 8 tpi
Code:LCM18
Price: $49.95
For 1" x 8tpi headstocks
Insiders
Club Discount Does Not Apply to this Item
This self centering, 3 jaw micro chuck is ideal for holding small
projects from the inside or outside. Its step jaws reverse for extra
versatility. Its small diameter provides a safety feature, keeping
your knuckles away from the jaws when working close to the chuck.
Weighs only 1.2 lbs, 2" dia. Holds work from 3/4" to 2-1/2"
inside, and up to 1-1/4" outside. |
| Live
Tailstock Centers
w/ 60 deg point - #1MT -
Code:LCENTLT1
Price: $19.95
Live Tailstock Centers w/ 60 deg point - #1MT
Large and heavy duty with 60¡ point and ball bearing precision.
w/ 60 deg point - #2MT
Code:LCENTLT2
Price: $19.95
Live Tailstock Centers w/ 60 deg point - #2MT
Large and heavy duty with 60¡ point and ball bearing precision.
|
4 Pc Drive
Center Set
for #2MT Lathes
Code:LCENT4
Price: $39.95
Save over $60 with this quality accessory set – individual
items purchased separately elsewhere would cost over $100.
This set includes hard to find replacement centers for Jet®,
Delta®, and other lathes equipped with #2MT headstock and tailstock
centers. Packaged in attractive and convenient wood display box.
Set includes:
- 5/8"dia headstock spur center for narrow spindles
- 1"dia headstock spur center for standard spindles
- Live ball bearing tailstock center with cup and point
- Hollow center for drilling 5/16" thru holes (for lamps,
etc)
LCENT4 MT#2 4-pc
center set $39.95
LCENT41 MT#1 4-pc center set $39.95
LCENTLT1x MT#1 live center $19.95
LCENTLT2x MT#2 live center $19.95
|
Fisch
Vortex™
HSS Brad Point Drill Bits
Ideal for fast and accurate pen blank drilling. These premium bits
will drill thousands of holes and stay sharp. Precision ground highly
polished fluting allows accurate hole sizes, fast chip removal and
extended bit life. Vortex bits run cool and perform best at higher
speeds (2300-3000RPM). Available in popular pen blank hole sizes.
Fisch Vortexª HSS Brad Point Drill Bits
- 10MM
Code: PK-10MMVX
Price:$15.95
Fisch Vortexª HSS Brad Point Drill Bits
- 7MM
Code:PK-7MMVX
Price: $10.95
Fisch Vortexª HSS Brad Point Drill Bits
- 8MM
Code:PK-8MMVX
Price: $13.95
|
Replacement
cutter heads for Universal Barrel Trimming Kit
Replacement 3/4" cutter head
Code:PKTRIM34
Price: $12.95
Replacement 5/8" cutter head
Code:PKTRIM58
Price: $10.95
Replacement 5/8" cutter head for Universal Barrel Trimming Kit
#PKTRIMKIT
|
Variable
Speed Turncrafter Pro
Code:TCLPROVS
Price: $244.95* (plus shipping)
We've engineered the TruncrafterPro VS to be the most powerful variable
speed midi-lathe on the market. The TurncrafterPro VS uses the same
heavy duty casting and precision components as its single speed award
winning counterpart (#TCLPRO). The lathe is constructed from cast
iron and includes a powerful 1/2HP universal motor with electronic
speed control that provides full torque at all speeds. The variable
speed feature provides you infinite and instantaneous speed control
as you turn. Dial a slow speed for larger pieces and faster speeds
for spindles and fine finishing. The 3-belt positions adjust from
650RPM to 3800RPM. The TCLPROVS features a control box with a cable
that lets you mount the box on the lathe or on your bench up to 3
feet from the lathe. The lathe includes many extras and has many accessories
available to make it a complete turning center. *Club discount does
not apply on model.
| Specifications: |
Purchase includes: |
- Motor: /2HP (650-3800 RPM)
- 3-step Motor Pulley
- Headstock: 1" x 8tpi, #2MT
- Tailstock: Live center, #2MT
- Construction: cast iron
- Distance between centers: 18"
- Swing over bed: 10"
- Wt: 80 lbs, 102 lbs with extension bed
- Overall size: 30" L x 7-1/4" W x 14-1/2"
H
- Length with extension bed: 52" long
|
- 6" Toolrest
- 3" Faceplate
- MT#2 Spur Center
- MT#2 Live Tailstock Center
- Spare Drive Belt
|
|
Mylands
Friction Polish
Code:MYPOL
Price: $17.95
For the best results, apply this friction polish while you are still
on the lathe. The results are quick and give a high gloss finish with
very little effort.
16.2 fl. oz.
Note: Ground UPS Only — Continental U.S.
|
Behlen's Woodturners
Polish
Code:BEHLENPOL
Price: $19.95
A true high gloss finish for any wood project you create on your lathe.
Apply the polish while your project is still on the lathe. The results
will speak for themselves, a professional finish in just a few seconds.
See what your pens will look like after applying this polish. Wow!
|
