Loading... Please wait...

Categories

PayPal Acceptance Mark

Takane Mini Quartz Clock Movements

American Made Takane Clock Movements 

Dimensions: 2 1/8 in w x 2 1/8 in h x 5/8 in d

These Takane mini-quartz clock motors are the standard in the industry. Perfect for clock hands under 5” long. This clock motor runs on one "AA" battery and is accurate to within two minutes a year. To choose the proper shaft length, carefully measure the thickness of the (Clock Body) material the clock movement shaft will go through it.  Leave enough room for the shaft thread to grip the nut supplies and find the appropriate model in the table below. If you are using a glass or plastic cover over the movement, make sure you have at least 1/8 inch extra clearance as you will need room for a second hand or a minute hand cap nut supplied. 

YOUR CHOICE of clock pairs of hour and minute hands is included.

 

    Fits Clock  Dials up to 1/8 "           Fits Clock Dials up to 1/4"      Fits Clock Dials up to 3/8 "                      

           Thumb               Thumb              Thumb

 

   Fits Clock Dials up to 1/2 "       Fits Clock Dials up to 5/8 "        Fits Clock Dials up to 3/4" 

   Thumb              Thumb                 Thumb

 

    See the clock hands on the clock hands page. Please do not assume that any clock hands you have will fit these Takane clock movements as the mounting holes are not standardized. 

   These American made Takane clock movements will operate a second hand, but second hands are considered optional. 

   All clock motor models have a 5/16" shaft diameter so a 3/8" mounting hole is the correct size to drill in your case.

  • American "I" Shaft - Diameter 5/16"
  • Optional Front Loading Metal Hanger
  • Step Second Hand Motion
  • Runs On 1 "AA" Size Battery