We carry Takane and Seiko mini quartz clock movements from the Takane clock company USA. Takane and Seiko quartz clock movements, Takane and Seiko clock movements with pendulum, Takane and Seiko clock movement with pendulum and chime, Takane and Seiko westminster chime clock movements, Takane and Seiko high torque clock movements. 

Mini Quartz Clock Motor & Clock Movements

For dials up to 3/8" thick.

8MM (5/16") shaft diameter

2-1/4" square by 5/8" thick case

Please select hour and minute had separately Please select second hand separately if desired. Brass mounting hardware with open end nut (if you do not plan to use second hands, order closed end nuts)

Clock hanger (pictured) Operates on one AA battery

Seiko's Ultra-Thin Clock Movement.

This quartz clock movement features step second motion which is a 'start-stop-start' motion that precisely measures the time in one second intervals. Accurate to within +/- 15 seconds per month. 

Special Features

  • Quartz Accuracy - Stabilized quartz crystal assures high accuracy to within ±15 seconds per month.
  • Reliability - A minimum number of parts (17 in entire motor) reduces wear within the motor and assures trouble-free operation. The motor is completely enclosed in its case, so dust and dirt cannot get into the motor.
  • Compact Size - The motor is approximately 2-1/8”x 2-1/8” x 1/2”.
  • Battery Life - The motor runs approximately two years on a fresh “AA” battery, not included.
  • Step Second Motion - The second hand, if used, moves in exact one second steps.

These Seiko motors will operate a second hand, but second hands are considered optional. See the bottom of the motor page for the link to our selection of second hands. Seiko motors require a .034 - .035 diameter second hand bushing as shown below. This hole size is too large for many other motors..All models have a 5/16" shaft diameter so a 3/8" mounting hole is the correct size to drill in your case.

 

Quartz Pendulum with Mechanical Strike Clock Movement
 
Two solid copper rods mounted in a heavy metal block produce a sound that only a mechanical strike can offer. Features include: a "bim-bam" sound, strikes on the half hour and hour with an hour count.
Only 6" square by 2" deep, requires one "D" battery, fits dials to 3/8" thick, 10MM shaft.
Your choice of hour & minute hands (unit will not accomodate a second hand). See hand section.  Included 16” Rod and 2/4” Bob
 

High Torque Mini Quartz Clock Movement - "AA" Cell 

Made in USA 

Our compact “AA” battery powered miniquartz clock motor model was designed specifically for use with today’s new larger clocks. They are the most powerful quartz clock movements on the market today for larger clocks-hour and minute hand spacing!

Our new “HT” series clock movements were designed specifically for use with large clock hands. The distance between where the hour and minute hands are installed has been increased! This increased distance will help to prevent longer hands from binding and leaves enough room to accommodate the counterweights that are commonly used on large minute hands. 

Seiko Double Electric Chime Clock Movement Pendulum 
 
Shaft fits dials to 1/4" 
 
With just a flip of a switch, our electronic double chime movements offer either Westminster or Whittington melodies. Also featured is a removable speaker (with generous leads)...either leave it attached behind the movement or attach it in your clock case to effect the best tone. The chimes sound every 15 minutes with the full melody and hour count on the hour. The pendulum model is supplied with an adjustable (up to 20”) single hook rod and 2-3/4” or bob (please see pendulun/bob selection for other size choices).
Other features include an optional night time silence, volume control, 8 MM (5/16”) shaft diameter, optional speaker bracket, brass mounting hardware with open end nut and your choice of hour & minute hands (check index for location).
A compact 3-1/4”H x 2-1/2”W x 1-1/4”D.
Made in Japan.
Requires one “C” battery.
Three year guarantee.
 
 

ELECTRONIC WESTMINSTER CHIME CLOCK MOVEMENT

Available with or without a pendulum, this economy movement plays the Westminster chimes of a Grandfather clock every 15 minutes and counts the hours on the hour. Model WCP-250 is available in three shaft lengths and includes an adjustable pendulum (up to 18") with your choice of a 2", 2-3/4" or 3-1/2" bob, and hour & minute hands. Size: 3"W X 4-3/4"H X 1-1/4"D. Operates on one "C" cell battery. Second hands available at slight additional cost.
Three year guarantee.

American Made-Quartz Pendulum Clock Movement

This is our smallest pendulum clock movement and has been "standard" in American manufacturing for years. We have changed the back of the movement so it is better able to sit flat against a wall. You can choose from 4 shaft lengths and 3 sizes of pendulum bobs. All pendulums consist of a 16" adjustable pendulum with your choice of 3 pendulum bob sizes. You can easily trim the pendulum rod to any length under 16".

Dimensions: 2 1/8"w x 3 3/4"h x 7/8"d

  • American "I" Shaft - Diameter 5/16"
  • Step Second Hand
  • Operates on 1 "AA" cell battery(not included)

Hermle - WESTMINSTER CHIMES & BIM BAM 
WITH REMOVABLE SPEAKER

This quartz movement is manufactured in Germany by Hermle, one of the world’s leading manufacturers of both mechanical and battery operated movements and is known to have the finest sound of any battery powered movement available. 

When you select the Westminster chime mode, the chime will sound every 15 minutes and play a part of the melody. The full melody is played on the hour plus the hour count. The bim-bam mode sounds on the half hour and hour plus counts the hour. Other features include: volume control, optional night time silence, adjustable (up to 18”) pendulum, your choice of a 2”, 2-3/4” or 3-1/2” bob (please specify), operates on two “C” cell batteries, three year guarantee, fits dials to 1/2” thick. Shaft diameter is 8 MM (3/8”). The speaker may be attached to the back of the movement or positioned inside your case with the included speaker bracket to effect the best tone. Size: 4-1/4”H x 4-3/8”W x 1-5/8”D. One pair of hour and minute are included in the pricing. Please note: only the six sets of hands shown below will fit this movement. Second hands are available at a slight additional cost, check index for location.

 

Recordable Chime Clock Movement

Westminster / Whittington / Recordable Chime/Non-Pendulum

 We permanently programmed an hour only Westminster and Whittington chime with hour count, then gave it a remote 2" speaker for good sound quality, and an increased the volume level so that this is now the loudest chime movement we have.

The recordable chime feature is totally unique. Whatever 10 second sound you record will play every hour on the hour. The model has a built in microphone and a 1/8" jack if you would like to use a higher quality microphone for your recording, or patch into another device The connecting wires are 12" long.

Hansen  

Synchron clock movements provide for a sweep second hand and split second accuracy for either consumer, industrial, or laboratory clocks and other time keeping applications.

The type "C" movement is a brass movement with smooth continuous hand movement. Active lifetime routinely exceeds 20 years. Self-resetting is an option with the "C" movement for customers who need to synchronize multiple clocks to a single master clock.